Infrared Electrical Inspectors – Auckland, Wellington, Christchurch – NZ Wide

If you are looking for infrared electrical inspectors in NZ, we offer an experienced nationwide service by certified infrared thermographers. Our most popular inspection type (normally referred to us by insurance companies), is thermal imaging of electrical switchboard panels.

To date, our company has infrared tested 1000’s of switchboard panels both onshore and offshore in NZ. We are a trusted provider of electrical thermal imaging services nationwide. No client is too big or small.

Here’s some photo’s recently taken during an electrical audit of an oil company in NZ…

A: T2 crimp needed to be replaced. Hot spot detected at over 100 degrees on a mud pump blower, requiring immediate further investigation due to the cable not being rated to the detected temperature.

B: Rig Air Compressor. The white phase was running 50% warmer than the black and red phase under the same load. This should be a balanced load.

C: Drill Water Pump: T3 White phase running hot. Incoming and outgoing should be the same temperature in this situation.

D: Load not balaced when all 3 phases were running the same amps.

We offer a prompt, efficient service nationwide… with the best pricing and quality reporting guaranteed.

Infrared electical inspectors and thermographic survey companies: Ashburton, Auckland City, Blenheim, Christchurch, Coromandel, Dargaville, Dunedin, East Auckland, Gisborne, Greymouth, Hamilton, Hastings, Invercargill, Lower Hutt, Manukau, Masterton, Matamata, Napier, Nelson, New Plymouth, Nth Shore, Orewa, Palmerston North, Papakura, Queenstown, Raglan, Rotorua, South Auckland, Taupo, Tauranga, Timaru, Upper Hutt, Waiheke Island, Waikanae, Warkworth, Wellington, West Auckland, Whangarei

Similar Posts: